The MST hub for connecting up to 3 external monitors via the video output of your notebook/PC allows you to increase your productivity by working with multiple screens. It uses Multi Stream Transport technology (DisplayPort 1.2 functionality), which enables the transmission of several AV signals over a single cable. This allows the use of several monitors connected via the MST hub setup. The MST hub can distribute different video streams to three connected displays. Basically, three playback modes are supported: Screen Mirroring (1 signal duplicated on 3 displays), Desktop Extend (3 signals on 3 displays), Split (1 signal split on 3 displays).

• DP 1.4 support (Alt mode) with up to 8.1 Gbps per channel, up to 32.4 Gbps over 4 channels
• Resolutions of 3 external monitors - MST mode: up to 1 x 4K / 60 Hz + 2 x 4K / 30 Hz
• Resolutions of 2 external monitors - MST mode: up to 2 x 4K / 60 Hz
• Power supply via USB-C connector - BUS powered
• No drivers or software needed, configuration is done through the display settings in the Windows operating system
• Support 3 display modes: Screen Mirroring (1 signal is duplicated on 3 displays), Desktop Extend (3 signals on 3 displays), Separate (1 signal is split on 3 displays)
• Support for graphics cards from AMD, Nvidia and Intel
• Support for Windows OS (11, 10)

• L 26.3 x W 3.6 x H 1.15 cm

quick start guide

• HDCP 2.2 and 1.4
• HDR (High Dynamic Range) video support
• MST (Multi Stream Transport) and SST (Single Stream Transport) support
• Body: ABS plastic
• Working temperature: 0-45°
• Power consumption in standby mode: approx. 1 W

Tips:

• To achieve the above resolutions, the computer (host) must support DP 1.4 (Alt mode). If your computer only supports DP 1.2, the corresponding resolutions will be reduced due to bandwidth limitations.
• The resolution configurations listed above are provided as theoretical references and actual resolutions will vary depending on the connected host computer and monitors.
• To use the full range of functions, please ensure that your device (graphics card) supports DP 1.4.
• When using a DisplayPort 1.1 graphics card, the MST hub functions as a splitter and mirrors the video source to all connected displays.
• Functionality may be limited depending on device specifications and operating system.
• MST hubs do not allow you to increase the number of displays supported by the graphics card. Each graphics card can support a limited number of displays. Please check the specifications of your device beforehand.
• At least one host system with DP 1.2/HBR2/MST or higher is required (recommended).

Így is ismerheti: DS 45333, DS45333

Galéria